Skip to content

Projects — our work

Real homes. Real kit. Our installs.

Every photo on this page is an Elixa installation, photographed by the team that fitted it — the outdoor units, the plant rooms, and the pipework nobody usually shows you.

Styled lounge with ThermaSkirt heated skirting below panelled walls and herringbone flooring
01

Heated skirting

ThermaSkirt, room by room

A whole portfolio of rooms warmed from their edges — herringbone lounges, carpeted bedrooms, tiled bathrooms and oak hallways, each one converted in hours with the walls handed back and not a radiator in sight.

  • ThermaSkirt Deco, torus and OV cappings
  • Fitted over wood, carpet and tile
  • Per-room thermostat control
Elixa installer looking up at a Cotswold stone home with an all-black solar array and a Vaillant aroTHERM plus heat pump by the patio
02

Solar + heat pump

Stone cottage, fully electrified

An all-black array following the stone roofline, with a Vaillant aroTHERM plus working quietly by the patio below. Solar and heating designed as one system — and signed off with a long look from the garden wall.

  • All-black solar array
  • Vaillant aroTHERM plus
  • Full system design & install
Unvented hot-water cylinder with neatly clipped copper pipework, underfloor heating panels visible in the room beyond
03

Cylinder + underfloor

The plant room, done properly

Copper set square and clipped, every run labelled in its place — with the underfloor heating first fix visible in the room beyond. The part of the job nobody sees is the part we're fussiest about.

  • Unvented hot-water cylinder
  • Copper primaries, clipped & insulated
  • Underfloor heating first fix
Two Grant Aerona3 heat pumps installed side by side on concrete bases against the brick gable of a large home under renovation
04

Heat pumps

Twin Aerona3s for a big renovation

One pump wasn't the answer for this one — two Grant Aerona3 units share the load on a large home mid-renovation, each on its own base with the pipework paired neatly between them.

  • 2× Grant Aerona3
  • Cascade arrangement
  • Dedicated concrete bases
Mitsubishi Ecodan R32 heat pump on anti-vibration feet against a brick wall, with insulated pipework routed around the kitchen window
05

Heat pumps

Ecodan on an occupied retrofit

A Mitsubishi Ecodan slotted against the back wall of a lived-in home — insulated pipework routed cleanly around the kitchen window, the unit up on anti-vibration feet, the garden handed back as found.

  • Mitsubishi Ecodan (R32)
  • Insulated external pipework
  • Anti-vibration mounts
Close-up of a Vaillant aroTHERM plus heat pump on a fresh base with anti-vibration mounts, ready for commissioning
06

Heat pumps

aroTHERM plus, ready for handover

The commissioning shot — a Vaillant aroTHERM plus levelled on its new base, mounts torqued, ready to be fired up, balanced and demonstrated before the paperwork is signed.

  • Vaillant aroTHERM plus
  • New base & anti-vibration mounts
  • Commissioned & demonstrated

Yours could be next on this page.

Book the free survey